Specifications
 

Louma 2 Telescopic arm
Maximum Reach 32` 9.75m   Minimum Reach 7` 10" 2.45m   Telescopic Range 24` 2" 7.30m
Max.Height (Under slung) 33` 10.05m   Max. Height (Over slung) 37` 11.28m   Min. lens Height (Over slung) 3` 7" 1.10m
Max Peak Speed  (24` / 7.31m  travel in 5 secs) 7` 6" / 2.3m p sec   Minimum Speed 3` 3" / 1m p hour   Set up time 30 - 45 min
Maximum Total Weight 3740 lbs 1700 kg   (including counterbalance weights)        
Fulcrum to Rear 8` 4" 2.54m   Minimum overall length 16` 2" 4.93m        
Maximum dolly length 5` 6" 1.68m   Maximum width of dolly 4` 11" 1.49m   Track gauge (Ronford) 3` 3" 1m
Maximum fulcrum height 7` 3" 2.36m   Minimum fulcrum height 5` 6" 1.68m        
Min. Dolly Width with Pneumatic Wheels removed when on track (10 min procedure)  3` 10½" 1.18m    
Minimum height from ground to top of first section of the arm 6` 11" 2.11m        
                 
Will it fit through the door?  Standard Pnumatic Wheels              
Required height clearance 7` ½" 2.15m     Maximum width of dolly 4` 11" 1.49m        
Min. Dolly Width with Pneumatic Wheels removed when on track  (10 min procedure) 3` 10½" 1.18m    
* See `Arm Lift` to see how the arm can easily be removed by two people and pass
through a low 4` doorway.
  Power supply 220-240v AC 50Hz 16Amp    

Will it fit through the door?    Low profile Hard Wheels

(See photos in Home Page Gallery)

Required height clearance          6` 9"           2.06m             Minimum width of dolly            4`5½"        1.36m

 

 

Remote head 2 Axis 3 Axis
Maximum camera payload 100lbs 45kgs 66lbs 30kgs
Minimum height to top of front arm section 3` 4" 1.01m 3` 4" 1.01m
Minimum width (without enclosure bars) 2` 2" 66cm 2` 6" 76cm
Minimum width (with enclosure bars) 2` 8" 81cm 3` 92cm
Integral camera power supply 12v / 24v 10Amp Max    

 

Terminology
Arm Limits   Preset limits of the arm at the push of a button.
Ramps   Preset acceleration / deceleration to aid the smooth start / stop movement of the telescope.
Limit Ramps   Aids the smooth movement to / from a preset limit.
Head Limits   Preset limits on pan, tilt and roll.
Smartpan   Head counterpans with swing of the arm.
Smart Tilt   Head counter tilts with the vertical movement of the arm.
Q Term   Touch screen display used to control settings.
Copy Node   Instruction from one axis to another.

 

Example 1.   Telescope to remote head pan - the head will counterpan to the telescopic movement of the arm.
     
Example 2.   Telescope to roll - the head will roll with the telescopic movement of the arm to a set limit.

 

                                        

Real time display of Camera Pan, Tilt & Roll + Camera Lens Height

 

Dimension Drawings

 

Dolly - Plan View
 
 
 
Dolly - Elevation - Column Down
 
 
 
Dolly - Elevation - Column Up