Specifications

Imperial Metric
Maximum Reach 32` 9.75m
Max.Height (Under slung) 33` 10.05m
Max Peak Speed (24` / 7.31m travel in 5 secs) 7` 6"/sec 2.3m/sec
Maximum Total Weight 3740 lbs 1700 kg
Fulcrum to Rear 8` 4" 2.54m
Maximum dolly length 5` 6" 1.68m
Maximum fulcrum height 7` 3" 2.36m
Min. Dolly Width with Pneumatic Wheels removed when on track (10 min procedure) 3` 10½" 1.18m
Minimum height from ground to top of first section of the arm 6` 11" 2.11m
Minimum Reach 7` 10" 2.45m
Max. Height (Over slung) 37` 11.28m
Minimum Speed (including counterbalance weights) 3` 3"/hour 1m/hour
Minimum overall length 16` 2" 4.93m
Maximum width of dolly 4` 11" 1.49m
Minimum fulcrum height 5` 6" 1.68m
Telescopic Range 24` 2" 7.30m
Min. lens Height (Over slung) 3` 7" 1.10m
Set up time 30 min 30 min

Will it fit through the door?  Standard Pnumatic Wheels 

Standard Pnumatic Wheels 

Imperial Metric
Required height clearance 7` ½" 2.15m
Maximum width of dolly 4` 11" 1.49m
Min. Dolly Width with Pneumatic Wheels removed when on track  (10 min procedure) 3` 10½" 1.18m

Low Profile Narrow Wheels 

Imperial Metric
Required height clearance 6`  9" 2.06m
Maximum width of dolly 4`  5  1/2" 1.36m

* See `Arm Lift` to view how the arm can easily be removed by two people and pass through a low 4` doorway.

Power supply 220-240v AC 50Hz 16Amp

Remote head 2 Axis

Imperial Metric
Maximum camera payload 100lbs 45kgs
Minimum height to top of front arm section 3` 4" 1.01m
Minimum width (without enclosure bars) 2` 2" 66cm
Minimum width (with enclosure bars) 2` 8" 81cm
Integral camera power supply 12v / 24v 10Amp Max

Remote head 3 Axis

Imperial Metric
Maximum camera payload 66lbs 30kgs
Minimum height to top of front arm section 3` 4" 1.01m
Minimum width (without enclosure bars) 2` 6" 76cm
Minimum width (with enclosure bars) 3` 92cm
Integral camera power supply 12v / 24v 10Amp Max

Printable PDF specifcations and drawings are available in DOWNLOADS

Louma 2   Terminology

Arm Limits: Preset limits of the arm at the push of a button.

Ramps: Preset acceleration / deceleration to aid the smooth start / stop movement of the telescope.

Limit Ramps: Aids the smooth movement to / from a preset limit.

Head Limits: Preset limits on pan, tilt and roll.

Smartpan: Head counterpans with swing of the arm.

Smart Tilt: Head counter tilts with the vertical movement of the arm.

Q Term: Touch screen display used to control settings.

Copy Node: Instruction from one axis to another.